Tools, Supplies, And Required Equipment - Traxxas E Revo VXL Owner's Manual

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Supplied Tools and Equipment
1.5mm "L" wrench 2.0mm "T" wrench
6-cell 2/3A NiMH battery* Body clips
APPLYING THE DECALS
The main decals for your model have been applied at the
factory. Additional decals are printed on self-adhesive
clear mylar and are die-cut for easy removal. Use a hobby
knife to lift the corner of a decal and lift it from the
backing. To apply the decals, place one end down, hold
the other end up, and gradually smooth the decal down
with your finger as you go. This will prevent air bubbles.
Placing both ends of the decal down and then trying to
smooth it out will result in air pockets.
Look at the photos on the box for typical decal placement.
2.5mm "L" wrench 4-way wrench
Required Equipment
4 AA alkaline
batteries
*Battery and charger style are subject to change and may vary from images.
For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
NiMH battery charger*
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, Part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
• Soldering iron
1/16 E-REVO VXL • 7
9 9