Traxxas E Revo VXL Owner's Manual page 12

VXL-3m Wiring Diagram
MOTOR
12 • 1/16 E-REVO VXL
TRAXXAS TQ RADIO & VELINEON POWER SYSTEM
i
Your model is equipped with the newest TQi 2.4GHz transmitter
with Traxxas Link™ Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
TRANSMITTER AND RECEIVER
Set Button
Red/Green Status LED
see page 30 for more info
Menu Button
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Link
Button
Power Switch Battery Compartment
** Accessory sensor port for use with the Telemetry Expander Module
(see Traxxas.com for more information)
MODEL WIRING DIAGRAM
Antenna
Steering Wheel
Receiver
V/T - Voltage/Temp Sensor Port
RPM - RPM Sensor Port
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Channel 1*
†
*Not used Accessory sensor ports for use with standard voltage/temperature and RPM
telemetry sensors (see Traxxas.com and included materials for more information)
Sensor Expansion
Port **
VXL-3m ELECTRONIC SPEED CONTROL
To Motor
LED
EZ-Set
Button
Channel 1
Steering Servo
Motor
(Velineon ® 380)
Channel 2
†
VXL-3m
†
Electronic
Speed Control
High-Current
Connector
High-Current
Battery Connector
Heat Sinks
LED