Bosch PROFACTOR GDS18V-770C Operating/Safety Instructions Manual page 11

Disconnect battery pack from tool before making any assembly, adjustments or changing accesso-
ries. Such preventive safety measures reduce the risk of starting the tool accidentally.
Inserting and Releasing
Battery Pack
Set Forward/Reversing lever (3) to the center (locked
position). Slide charged battery pack (5) into the
housing until the battery pack locks into position (Fig.
3).
Your tool is equipped with a secondary locking latch to
prevent the battery pack from completely falling out of
the handle, should it become loose due to vibration.
To remove the battery pack, press the battery pack
release button (6) and slide the battery pack (5)
completely out of tool housing (Fig. 4).
Inserting and Removing Accessories
Attach only high quality impact ready accessories with
the proper size square drive designed for use with
impact wrenches. To install a socket (10), simply push
completely onto output drive (1) (Fig. 5, 6).
Through hole (2) allows for more secure socket
retention via compatible socket and use of accessory
pin and ring or one-piece retainer. Follow accessory
retention device manufacturer's recommendations for
use of through hole.
Assembly
Fig. 3
5
Fig. 5
Fig. 6
(10)
11
Fig. 4
6
5
GDS18V-740 C
(2)
(1)
GDS18V-770C
(10)