Cadillac Escalade 2022 Owner's Manual page 345

344 DRIVING AND OPERATING
Hitch Cover To remove hitch cover, if equipped:
1. Remove the two fasteners on the
lower tabs (2).
2. Pull the lower edge of the cover to
about a 45 degree angle.
3. Pull the cover upward to disengage
the upper attachments (1).
To reinstall hitch cover:
1. Hold cover at a 45 degree angle to
the vehicle and push the upper
tabs into the slots in the bumper.
2. Push the bottom of the cover
forward until the lower tabs line up
with the lower slots.
3. Snap the hitch cover into place by
pushing the upper corners
forward (1).
4. Reinstall the two fasteners on the
lower tabs (2).
Consider using mechanical sway
controls with any trailer. Ask a
trailering professional about sway
controls or refer to the trailer
manufacturer's recommendations and
instructions.