Cadillac Escalade 2022 Owner's Manual page 152

: Turns on the parking lamps
including all lamps, except the
headlamps.
: Turns on the headlamps together
with the parking lamps and
instrument panel lights.
IntelliBeam System
If equipped, this system turns the
vehicle's high-beam headlamps on and
off according to surrounding traffic
conditions.
The system turns the high-beam
headlamps on when it is dark enough
and there is no other traffic present.
This light comes on in the
instrument cluster when the
IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam
To enable the IntelliBeam system,
press on the turn signal lever
when it is dark outside and the
exterior lamp control is in AUTO
or .
Driving with IntelliBeam
The system only activates the high
beams when driving over 40 km/h
(25 mph).
The blue high-beam on light appears
on the instrument cluster when the
high beams are on.
There is a sensor near the top center
of the windshield that automatically
controls the system. Keep this area of
the windshield clear of debris to allow
for best system performance.
LIGHTING
The high-beam headlamps remain on,
under the automatic control, until one
of the following situations occurs:
The system detects an approaching
vehicle's headlamps.
The system detects a preceding
vehicle's taillamps.
The outside light is bright enough
that high-beam headlamps are not
required.
The vehicle's speed drops below
20 km/h (12 mph).
The IntelliBeam system is disabled
by the button on the turn signal
lever. If this happens, press
the turn signal lever when the
exterior lamp control is in the
AUTO or position to reactivate
the IntelliBeam system. The
instrument cluster light will come
on to indicate the IntelliBeam
system is reactivated.
151
on