Note
To configure keyboard and input methods options, please refer to the following steps:
1. Go to SettingsBasicLanguage & KeyboardVirtual Keyboard
2. Click on "+" to add more input method.
3. Go to SettingsLanguage & KeyboardCurrent Keyboard, and choose from the input methods.
4. After these steps, the method would change to the new one.
Users could touch and press the key on the keyboard for about 2 seconds to input the alternative character. For example, touch and press the "+" key for about 2 sec
selection "±".
Use the Message Waiting Indicator
The GXV3350 message waiting indicator LED is on the upper right corner of the device. It could notify the users with different messages and status of the phone
status description below. The priority for the LED indicator is from high to low in the following table.
Color
LED Status
Fast Flashing
Solid
Slow Flashing
Flashing
Solid
Fast Flashing
OFF
OFF
MAKE PHONE CALLS
Register SIP Accounts
The GXV3350 supports up to 16 independent SIP accounts. Each account can have separate SIP servers, usernames and NAT configurations.
Account Status
On the idle screen, the account widget shows the account name, and registration status.
The following figure shows the account is successfully registered (account icon is green).
If the account icon is grey, it's still trying to register or unable to register.
Incoming call
Calling, Talking, Conferencing, Screensaver on when the LCD is off
A call is on hold
Missed call (s), New voicemail (s), New SIP Message (s)
High memory usage, Maximum contact storage, Network disconnect
Upgrading
Normal
Table 10: GXV3350 MWI LED Status
Figure 41: GXV3350 Account Widget
Description