Switching On The Appliance/Selecting A Programme; Changing The Temperature; Changing Spin Speed / Selecting Rinse Hold - AEG LAVAMAT 48580 User Information

User information

Switching on the appliance/Selecting a programme

Select the programme using the
programme knob, e.g., LINEN
/EASY CARES
By selecting a programme, you
switch the appliance on at the
same time.
– The display lights up and shows
the programme set, the current
time and the estimated end of
the cycle.
– Depending on the programme, the washing machine suggests a
temperature and a spin speed. You can change these suggestions.
– The lighting for the display switches itself off at the end of the cycle
or, if the appliance is not started after the programme is set, after 10
minutes. To switch the light on again, press any key or turn the
programme knob.

Changing the temperature

Press the TEMP.
repeatedly until
temperature is displayed.

Changing spin speed / Selecting rinse hold

Press the
repeatedly, until the desired spin
speed or
displayed.
• With spin speed «0» the last
rinse water is drained off at
the end of the cycle, but the
washing is not spun.
• With RINSE HOLD the washing is left to soak in the last rinse
water. There is no final spin after the intermediate spin(s).
Intermediate spins are programme-dependent and cannot be
altered.
12
.
key
the desired
RPM key
RINSE HOLD is
LINEN/EASY CARES
Cycle end at
1000
50°C
LINEN/EASY CARES
Cycle end at
1000
50°C
12.45
14.37
12.45
14.37