Video Playback - Loewe Cantus 3870 Z Operating Instructions Manual

Operating additional equipment

Video playback

In order to see the VCR picture on your TV and
hear its sound you have several possibilities:
1. You can use the Euro-AV sockets on the TV
set and on the VCR. This is the best option of
all – good picture and sound quality.
If you are playing back from a VCR with
Digital Link Plus, the VCR picture is shown on
the current station slot.
If you are playing back from a standard VCR,
DVD player or camcorder, select the AV
socket to which the video signal is connected
in the AV selection list or the station table.
Video recorders emit a switching voltage
during playback which the TV set can decode
(can be activated for every VCR in the
connection wizard). Then the VCR picture is
shown on the current station slot as in Digital
Link Plus VCR's.
2. You use the antenna connection between the
VCR and the TV set. The sound is only
broadcast in mono. To do this, select the first
menu item, e.g. VCR, in the AV selection list.
Calling an AV program in the AV selection
list
0
Call AV selection list
AV Selection
VCR AV1 AV2 AVS
Select AV socket or VCR for VCR
transmitter.
Now you will see the playback from the
connected AV unit.
Calling an AV in the station table
OK
Call the station table
Station table: TV
AVS 6 S–RTL
AV2 7 N–TV
AV1
8 DSF
0 VCR
9 TM3
1 ARD
10 PRO7
2 ZDF 11 RTL 2
3 SAT.1 12 WDR 3
4 RTL 13 BR 3
5 VOX 14 HR
6 NDR 15 MDR 3
0 ... 9 Select program:
Change programs
Select and
Favorite programs
proceed with OK
O K
Sort alphabetically
In the numeric sorting you will always find the
AV sockets at the top of the list without station
numbers.
Mark the AV socket
Now you will see the playback from the
connected AV unit.
i
Info
M Menu
E End
19