Installing The Side Trim Strips - Blomberg DWT 56502 FBI Installation Manual

A
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
• Make sure the dishwasher is plumb and
• Turning the screwdriver in the direction of the
T20
• Turning the screwdriver in the direction of the

6.4 INSTALLING THE SIDE TRIM STRIPS

1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the side
walls (Figure B).
• Make sure you use the correct trim strip since
B
Notice :
notice dishwasher can be placed with a small
clearance under the counter top.
black arrows will bring the dishwasher back feet
up.
white arrows will take the dishwasher rear feet
down.
Notice :
there is a left and right side strip. The flexible
material should be facing forward (Figure B).
7
USA