Honda EU7000is Owner's Manual page 106

OPTIONAL PARTS
4. Pass the remote control cable through the supplied wire grommet,
and fit the grommet into the battery maintenance cover knockout.
5. Plug the remote control cable into the connector.
6. Install the battery maintenance cover and tighten the cover screw.
REMOTE CONTROL
CABLE
BATTERY MAINTENANCE COVER
7 . To avoid accidentally unplugging the remote control cable, secure the
cable to the generator frame with a cable tie as shown.
• Never operate the generator
without the battery maintenance
cover in place, as poor engine and
generator performance will result.
• Install the plug to the connector
when the remote control kit is
removed.
104
GROMMET
REMOTE CONTROL CABLE
REMOTE CONTROL BOX
CABLE TIE
PLUG