Yamaha GRIZZLY YFM70GPAN Owner's Manual page 150

1
2
1. Carrier bolt (under the fenders)
2. Carrier bolt (lower)
3. Remove the battery holding plate by remov-
ing the nuts.
4. Disconnect the negative battery lead first,
then the positive battery lead by removing
9
their bolt. NOTICE: When removing the bat-
tery, the main switch must be off, and the
negative lead must be disconnected be-
fore the positive lead.
1
2
[ECB01002]
1
2
1. Battery holding plate
2. Nut
3. Negative battery lead (black)
4. Positive battery lead (red)
5. Pull the battery out of its compartment.
ECB00622
NOTICE
Never attempt to open the battery or remove
the battery cell seals, as this would permanent-
ly damage the battery.
To charge the battery
 Confirm the recommended charging rate as
specified on the battery itself.
9-54
4
3