Advertisement
15
MAINTENANCE
WARNING: To reduce the risk of electric shock, turn the machine off and unplug from electrical socket before performing
maintenance/troubleshooting checks.
Important: All water and solution must be removed from tanks before removing blockages from the brushes.
Removing blockages from the brushes
Place the machine flat.
Advanced Brush Maintenance
Locate and remove the Spinscrub brushes as described
above. Use a screwdriver to unclip both Spinscrub covers.
Locate Spinscrub brushes and pull firmly to remove.
The brushes can be cleaned under running water. Leave
Spinscrub brush to dry before refitting them onto the
machine. You should hear a 'click' when they are
correctly in place.
Each brush can be removed
and cleaned under running
water. Leave the brushes to
dry before refitting them.
After cleaning, place the
individual brushes back and
clip the Spinscrub covers
back into place.
Advertisement
