LG MUSIC FLOW SH8 Owner's Manual page 48

48 Operating
3. Surround environment option appears.
Select the left and right speakers by tapping
connected speakers. Then select [OK].
3
4. The speakers are ready to surround playback.
,
Note
y It is recommended to set the surround
speakers to same models.
y The weak signal because of the long distance
between speakers or wireless router and
signal interference may cause abnormal
playback.
y Depending on your wireless environment, the
grouping may be broken.
y For smooth playback, it is recommended to
select the speaker connected by LAN cable
as a master speaker. If you set the master
speaker connected wirelessly, placed closer
from the speaker connected wired.
y To enjoy the home cinema system without
Music Flow Player app, follow the below
steps.
1. Plug in the Sound bar
2. The Sound bar connect to the home
network. (wired or wireless)
3. Plug in the rear speakers.
4. The rear speakers connect to the home
network. (wired or wireless)
5. Press the sound bar' s
and then press the left rear speaker' s
(Add) button. After left rear
speaker connection, press the right rear
speaker' s (Add) button.
6. When the speaker setting is
complicated, surround sound mode is set
automatically.
y if the home cinema mode configure with
retained product, updates the speaker to the
latest version.
y Check every speaker' s network connection
when you cannot set the speakers. If the
speakers are not connected to the home
network, refer the "Connecting the speaker
to your Home Network" .
(Add) button