Page 1
OWNER’S MANUAL Wireless Sound Bar Please read this manual carefully before operating your set and retain it for future reference. MODELS LAS465B (LAS465B, SPH4B-W) SH3K (SH3K, SPH4B-W) *MFL69681801* www.lg.com...
Page 2
Getting Started CAUTION: Do not use high voltage products around Safety Information this product. (ex. Electrical swatter) This product may malfunction due to electrical shock. CAUTION: No naked lame sources, such as lighted CAUTION candles, should be placed on the device. RISK OF ELECTRIC SHOCK CAUTION: Do not block any ventilation openings.
Page 3
Getting Started injury from tip-over. This device is equipped with a portable battery or accumulator. Safe way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, 13.
Page 4
Reorient or relocate the receiving antenna. Responsible Party : y Increase the separation between the equipment LG Electronics USA, Inc. 1000 Sylvan Ave and the receiver. y Connect the equipment to an outlet on a circuit Englewood Cliffs, NJ 07632...
Table of Contents Table of Contents Getting Started Operating Operations Safety Information – DRC (Dynamic range control) Unique features – Turn off the sound temporarily – Auto power down – Portable In – Using your TV remote control Introduction – AUTO POWER On/Off –...
Getting Started Unique features Accessories Please check and identify the supplied accessories. Auto power down This unit supports turning off by itself for energy consumption saving. Portable In Remote control (1) Batteries (2) Listen to music from your portable device. (MP3 player, Notebook, Smart phone, etc..) Wall Bracket Install Introduction...
Getting Started Front panel D E F A 1/! (Standby/On) F Function LED Note B F (Function) y You can check current function through Selects the function and input source. the LED. C p/o (Volume) Adjusts volume level. D Standby LED y This unit turns of LED If there is no key It lights up in red on standby mode.
Getting Started Installing the sound bar You can hear the sound by connecting the unit to another device: TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want. (Refer to pages 13 - 14.) >...
Getting Started 2. When you mount it on a wall (concrete), use the Mounting the main unit wall plugs (Not supplied). You will need to drill some holes. A guide sheet (Wall Bracket Install on a wall guide) is supplied showing you where to drill. Use the sheet to check the points where you should You can mount the main unit on a wall.
Page 11
Getting Started 3. Remove the Wall bracket install guide. 5. Hang the main unit onto the bracket as shown below. 4. Fix it with screws (not supplied) as shown in the illustration below. > Caution y Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.
Connecting 3. If the LED of the wireless subwoofer already Wireless subwoofer blinks in yellow-green continually, you can skip this step. connection Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. LED indicator of wireless subwoofer LED Color Status Yellow green...
Connecting Note Connecting to your TV y Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover. y You can enjoy the TV audio through the Using an OPTICAL cable speakers of this unit. In the case of some TV 1.
Connecting Optional equipment PORT. IN connection connection OPTICAL IN connection Connect an optical output jack of external devices to the OPTICAL IN jack. Portable cable MP3 player, etc... Optical cable To the digital optical output jack of external device Listening to music from your portable 1.
Vizio y Make sure that the sound output of your TV is set to [External speaker]. y Depending on the remote control, this function may not work well. y This function does not operate on LG TV's magic remote control.
Operating AUTO POWER On/Off Auto function change This unit automatically turns on by an input source : This unit recognizes input signals such as optical Optical or Bluetooth. and Bluetooth. And then changes suitable function automatically. When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the suitable function.
In order to use Bluetooth wireless technology, 9C:02:98:4A:F7 :08 , you will see devices must be able to interpret certain profiles. This “LG LAS465B ( 08 ) / LG SH3K ( 08 )” on your unit is compatible with following profile. Bluetooth device.
Operating Note Sound adjustment y When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and Setting the surround mode keep the distance. However it may not work well in the case This system has a number of pre-set surround sound below : fields.
Troubleshooting Troubleshooting PROBLEM CAUSE & CORRECTION y Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Ampliier, etc.) and turn it on again. y Disconnect the power cord of this unit and the connected external device (TV, The unit does not work properly.
Troubleshooting PROBLEM CAUSE & CORRECTION Check the details below and adjust the unit according to them. y Switch [ON] state of DRC function to [OFF] by using remote controller. y With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on When you feel the TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Laboratories. Dolby and the double-D symbol are the Bluetooth SIG, Inc. and any use of such marks trademarks of Dolby Laboratories. by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. For DTS patents, see http://patents.dts.com.
Appendix Specifications General Power requirements 120 V ~ 60 Hz 27 W Power consumption Networked standby : 0.5 W (If all network ports are activated.) Dimensions (W x H x D) Approx. 950 mm x 71 mm x 47 mm (37.4 inch x 2.8 inch x 1.9 inch) Net Weight Approx.
Appendix Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean y Do not use volatile liquids such as insecticide spray near the unit.
Page 24
LG Customer Information Center USA, Consumer 1-800-243-0000 USA, Commercial 1-888-865-3026 Register your product Online! www.lg.com...