The Settings Page - PRESONUS Studio 1810c Owner's Manual

4 UC Surface Monitor Control Software
4.3

The Settings Page

4.3 The Settings Page
The Settings page allows you to configure your Studio-series. To open the
configuration settings page, click on the Settings button in the upper right-hand
corner of the screen.
1. Show ADAT. This gives you the option to show your ADAT inputs in your UC
Surface Mixer. If you are not connecting external devices to your ADAT input,
you can turn this off to reduce the size of your monitor mixes and display just the
inputs you are using.
2. Peak Hold. Disables peak hold metering. By default, peak metering is active. To
change to peak hold metering, turn this control On.
3. Mixer Bypass. Bypasses UC Surface mixer and routing. While Mixer Bypass is
active, your Studio-series interface will function as a simple I/O device for your
DAW. When the mixer is bypassed, you must route audio to the desired output
using its dedicated playback stream both for system playback (if desired) and
DAW playback.
4. Color Scheme. This allows you to adjust the overall lightness or darkness of the
UC Surface Mixer.
5. Colorize Channels. You can select a custom color for just the channel name or
chose to color the entire channel strip.
6. Driver Settings. Displays the current driver settings for your Studio-series
interface. To change these settings, open the Launch window.
7. Version Info. Displays the current firmware and UC Surface version.
Studio Series 1810c and 1824c
1
2
3
4
5
6
7
Owner's Manual
17