Table of Contents
Advertisement
4
Pull the microSD card slot cover up.
5
Insert a microSD card into the slot.
NOTE: confirm that the microSD card fits flush against the
card slot contacts.
6
Close the SD card cover.
7
Slide the SD card cover towards the outside edge of the
device until it clicks.
Data management
You can store files on your device. The device has a memory
card slot for additional data storage.
NOTE: the device is not compatible with Windows 95, 98, Me,
Windows NT
and Mac OS 10.3 or earlier.
®
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com). In addition to map and data storage, the
memory card can be used to store files such as maps, images,
geocaches, routes, waypoints, and custom POIs.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB
cable.
1
Plug the small end of the USB cable into the port on the
device.
2
Plug the larger end of the USB cable into a port on your
computer.
3
When your zūmo device prompts you to enter file transfer
mode, select Yes.
A picture of your device connected to a computer appears on
the device screen.
Depending on your computer operating system, the device
appears as either a portable device, a removable drive, or a
removable volume.
Transferring data from your computer
1
Connect the device to your computer
to Your Computer, page
Depending on your computer operating system, the device
appears as either a portable device, a removable drive or a
removable volume.
2
On your computer, open the file browser.
3
Select a file.
4
Select Edit > Copy.
5
Browse to a folder on the device.
NOTE: for a removable drive or volume, you should not place
files in the Garmin folder.
6
Select Edit > Paste.
Disconnecting the USB cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1
Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray and select your device.
• For Mac computers, drag the volume icon to the rubbish
bin.
2
Disconnect the cable from your computer.
Viewing GPS signal status
Hold
for three seconds.
Appendix
(Connecting the Device
25).
Purchasing additional maps
1
Go to your device product page at garmin.com.
2
Click the Maps tab.
3
Follow the on-screen instructions.
Purchasing accessories
Go to garmin.com/accessories.
25
Advertisement
Table of Contents
