Siemens PROFINET CP 343-1 Manual page 6

Preface
● SIMATIC NET Manual Collection
● On the Internet under the following entry ID:
FAQs on the Internet
You will find detailed information (FAQs) on using the CP described here on the Internet at
the following address (entry type "FAQ"):
Link: (http://support.automation.siemens.com/WW/view/en/10806067)
Security messages
Note
For its automation and drives product portfolio, Siemens provides IT security mechanisms to
support secure operation of the plant/machine. Our products are continuously being further
developed also taking into account the aspect of IT security. We therefore recommend that
you regularly check for updates of our products and that you only use the latest versions.
You will find information in:
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=
en)
Here, you can register for a product-specific newsletter.
For the secure operation of a plant/machine, it is also necessary to integrate the automation
components in a full IT security concept for the entire plant/machine that represents the state
of the art in IT technology. You will find information on this in:
(http://www.siemens.com/industrialsecurity)
Products from other manufacturers that are being used must also be taken into account.
6
The DVD ships with certain SIMATIC NET products.
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Manual, 10/2012, C79000−G8976−C201-07
CP 343-1