Alcatel-Lucent 8262Ex User Manual page 4

8262/8262Ex DECT Handset
This document describes the services offered by the 8262 DECT Handset connected to an OXO
Connect.
Operating conditions
This approved DECT telephone is intended to be used with an ALE International cordless PABX. The
following conditions must be respected, notably concerning the use of radioelectric frequencies:

Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

To limit the risk of interference, people with pacemakers must keep the wireless telephone away from
their equipment (minimum distance of 15 cm/6 inches).

It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).

DECT equipment can only be used to establish links between fixed points if these links are temporary.

The conditions of access to a DECT equipment telepoint network shall be stipulated by contract with
the operator of the authorized telepoint network concerned.

Switch off the telephone before changing the battery.

You must not switch on or use your telephone near gas or inflammable liquids.

The handset includes magnetic elements that may attract sharp metallic objects.

There is a danger of explosion if the battery is replaced incorrectly. Use only recommended battery:
Alcatel-Lucent 3BN67332AA (Dongguan Deereng New Energy Co. Ltd. RTR001FXX - Li-ion 3.7V
1100mAh 4.1Wh).

The mains power socket used must be close to the charger/holder and easily accessible, so that it can
be used as an 'on/off' facility.

Battery charge: Charge the battery for about 6 hours before initial use.

The 8262 DECT Handset desktop Dual charger (3BN67346AA), is dedicated for 8262 Dect handsets
(3BN67345AA) and needs the following Power Supply Units:
1. 8232 DECT Handset Desktop charger PSU Europe (3BN67335AA)
TenPao (Model S005AYV0500100) – efficiency level VI (rating I/P:AC 100-240V, 0.2A; O/P: DC
5V, 1A)
Friwo FW7713/XX – efficiency level V (rating I/P:AC 100-240V, 150mA; O/P: DC 5V, 1A).
2. 8232 DECT Handset Desktop charger PSU WW (3BN67336AA)
TenPao (Model S008ACM0500100 with UK,US,AUS plugs) – efficiency level VI (rating I/P:AC
100-240V, 0.3A; O/P: DC 5V, 1A)
Friwo FW7712 - efficiency level V (rating I/P:AC 100-240V, 125mA; O/P: DC 5V, 0.9A)

You can charge the device by connecting it to a USB 2.0 port (type A). Use only the cable provided
with the 8262 DECT Handset Desktop Dual Charger (USB 'A' plug).

The 8262 DECT Handset Rack Charger (3BN67351AA) will use a dedicated PSU:
8262 Dect handset PSU WW for rack charger (3BN67353AA)

To prevent possible hearing damage, do not listen at high volume levels for long periods.

With the 8262EX DECT Handset, use only Bluetooth devices marked with the ATEX logo, usable in an
ATEX (potentially explosive atmosphere) area.

Never charge or install the battery in an ATEX (potentially explosive atmosphere) area.
The labels and icons presented in this document are not contractually binding and may be modified
without prior warning. The labels and icons displayed on your phone depend on the system to which you
are connected and may differ from those specified in this document.
8AL90323ENABed01
63
4 /