Mounting Instructions - Danfoss DEVIreg Smart Installation Manual

Intelligent electronic timer thermostat or switch with wi-fi connectivity and app control

Hide thumbs Also See for DEVIreg Smart:

Table of Contents

Mounting Instructions

Please observe the following placement guidelines:

Place the thermostat at a suitable height on the wall

(typically 80-170 cm.). Switch can be placed on free

area on the wall.

The thermostat/switch should not be placed in wet

rooms. Thermostat/switch must be placed outside

zone 2. Place it in an adjacent room and use floor

sensor only. Always place the thermostat/switch

according to local regulation on IP classes.

Do not place the thermostat on the inner side of a

poorly insulated exterior wall.

Always install the thermostat at least 50 cm from

windows and doors, due to draft, when using regu-

lation in: floor and room mode or room alone mode.

Do not place the thermostat in a way that it will be

exposed to direct sunlight.

DEVIreg™ Smart

Installation Guide

Table of Contents