Table of Contents
Advertisement
Run the appliance care programme as
follows:
Prepare the appliance for appliance
1.
care. ~ Page 43
Set the programme to position 1.
2.
Press and hold ö (Iron Dry). At the
3.
same time:
Set the programme to position 4.
4.
'˜‚ and the programme duration will
now alternate on the display.
Press ˜.
5.
'˜ƒ and the programme duration
will now alternate on the display.
Pull out the condensation container
6.
horizontally and empty it.
Pour a bottle of the original
7.
appliance care product and
approx. 1 ^ litre of warm tap water
into the condensation container.
Hold the full condensation
Note:
container horizontally at all times so
that no liquid spills out.
Slide in the condensation container
8.
until it clicks into place.
Press A (Start/Pause).
9.
The appliance care programme will start
and an audible signal will sound.
After a while, the appliance will pause
the appliance care programme and the
remaining programme duration will flash
on the display.
Appliance care
en
47
Advertisement
Table of Contents
