Table of Contents
Advertisement
--------
Symbol
Description
Programme status:
Drying
Š
Dryness level:
ö
Iron Dry
Dryness level:
»
Cupboard Dry
Dryness level:
Ò
Cupboard Dry Plus
Anti-Crease
Q
-˜-
Pause
Programme end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. ñ 02:45
Programme delay
Empty the condensation con-
ð
tainer ~ Page 31
Fluff filter
å
Automatic heat exchanger
ó
rinse
Rinsing progress indicator
ªªª
Basic appliance care pro-
''§"
gramme
Appliance settings
œ
Information
Lit: status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in"
time
Empty the condensation container and then reinsert
■
it.~ Page 31
Then press A (Start/Pause).
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure
■
that the drain hose:
– Is correctly connected. ~ Page 36
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any
debris.
Remove the fluff ~ Page 32
The heat exchanger is cleaned automatically. Do not
pull out the condensation container while this is dis-
played.
Not a fault. After a certain period, the appliance will auto-
matically recommend that you run the basic appliance
care programme. Run the basic appliance care pro-
gramme. ~ Page 45
Alter the appliance settings ~ Page 34
Display
en
21
Advertisement
Table of Contents
