Table of Contents
Advertisement
Cleaning and maintenance
en
Cleaning the moisture sensor
The moisture sensor measures
Note:
the amount of moisture in the laundry.
After long periods of usage, the
moisture sensor may become covered
by a fine layer of limescale or detergent
and care product residue. These
deposits must be removed regularly,
otherwise the drying results may not be
optimal.
Open the door.
1.
Clean the moisture sensor with a
2.
rough sponge.
Caution!
Risk of damaging the moisture sensor.
The moisture sensor is made from
stainless steel. Do not clean the sensor
with abrasive cleaning products or wire
wool.
Cleaning the filter in the
condensation container
The filter in the condensation
Note:
container cleans the condensation
water, which is used during the
appliance's automatic cleaning cycle.
40
Pull out the condensation container
1.
horizontally.
Pour out the condensation water.
2.
Remove the filter.
3.
Clean the filter under warm, running
4.
water or in the dishwasher.
Push the filter in until you feel it lock
5.
into place.
Caution!
If the filter is not inserted, fluff can
find its way inside the appliance
and damage it.
Only operate the appliance with the
filter inserted.
Push the condensation container in
6.
until you feel it lock into place.
Advertisement
Table of Contents
