Removing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
optical
2
Remove the
base
3
Remove the battery.
Procedure
1
Open the latch and disconnect the I/O-board cable from the system board.
2
Open the latch and disconnect the hard-drive cable from the system board.
3
Gently peel the tape that secures the touchpad to the palm rest and keyboard
assembly.
56
computer. After working inside your computer, follow
After working inside your
drive.
cover.
computer. For more safety best
www.dell.com/
Before