Table of Contents
Advertisement
To retrieve the seat position set with a button:
1. Turn the ignition switch to "ON".
2. Put the select lever in the "P" position and apply the parking brake. Then, press button
"1" or "2". The seat and outside mirrors are automatically recalled to your preferred
positions.
To set a seat position with the access key fob:
1. Make sure the select lever is in the "P" position with the parking brake applied and the
ignition "OFF".
2. Adjust your seat and outside mirrors to the desired position.
3. While holding the "SET" button, press and hold the unlock button on the access key
fob. A chirp sounds when the position is registered.
To retrieve the seat position set with the access key fob:
1. Hold the access key fob.
2. Unlock and open the driver's door. The seat and outside mirrors are automatically
recalled to your preferred positions.
HOW TO APPENDIX
147
Advertisement
Table of Contents
