Bosch GLM100-23 Operating/Safety Instructions Manual page 5

conformance with IEC 60825-1 Ed. 3., as described in
Laser Notice No. 56, dated May 8, 2019." This can lead to
persons being blinded.
Working safely with the measuring tool is possible only when
the operating and safety information are read completely and
the instructions contained therin are strictly followed. Never
make warning labels on the Measuring tool unrecognizable.
Never aim the beam at a workpiece with a reflective surface.
Bright shiny reflective sheet steel or similar reflective surfaces
are not recommended for laser use. Reflective surfaces could
direct the beam back towards the operator.
Take care to recognize the accuracy and range of the device.
Measurement may not be accurate if used beyond the rated range
of the device.
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
The use of optical instruments with this product will increase
eye hazards.
Do not point the laser beam at persons or animals and do not
look into the laser beam yourself, not even from a large distance.
160992A6EZ GLM100-23 202210.indd 5
General Safety Rules
DO NOT direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This laser measure produces
class 2 laser radiation and complies with
21 CFR 1040.10 and 1040.11 except for
Safety Rules
-5-
10/4/22 10:19 AM