Advertisement
Install the FMC for Versions 6.5 and Later
Tip
For virtual devices, refer to the documentation for your virtual platform. For VMware in particular, custom
power options are part of VMware Tools.
Caution
Do not shut off the FMC using the power button; this may cause data loss. Using the web interface or shutdown
commands prepares the system to be safely powered off and restarted without losing configuration data.
Procedure
Step 1
Choose System > Configuration> Process
Step 2
Choose one of the following:
• Shutdown Management Center to initiate a graceful shutdown of the FMC.
• Reboot Management Center to shutdown and restart the FMC gracefully.
• Restart Management Center Console to restart the communications, database, and HTTP server
Install the FMC for Versions 6.5 and Later
Follow these instructions to install an FMC that will run Firepower Versions 6.5 and later.
Review Network Deployment for Versions 6.5 and Later
To deploy the FMC you need information about the environment within which it will operate. The following
figure shows an example network configuration for a Firepower deployment.
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
6
processes. This is typically used during troubleshooting, and may cause deleted hosts to reappear in the
network map.
Cisco Firepower Management Center 1000, 2500, and 4500 Getting Started Guide
Advertisement
