How To Use The Stopwatch; Stopwatch Function; The Names Of The Parts And Functions Of The Stopwatch; Before Using The Stopwatch - Seiko SFJ001P Instructions Manual

2
16
EN

■ Before using the stopwatch

Before using the stopwatch, reset it and check that the stopwatch hands (1/100-second,
1/10-second, second, minute) are stopped at "0 seconds and 0 minutes".
* When the stopwatch hands (1/100-second, 1/10-second, second) point to the 6 o'clock position, the energy is
depleted, and the stopwatch will not operate. Charge the stopwatch before use.
"About energy" → P.27
3
• How to reset the stopwatch
* The stopwatch can be operated when the crown is at the normal position.
Button B Button C
The stopwatch has
stopped.
The stopwatch is
operating.
18
EN
Current status
Press Button C to make the
stopwatch hands move

Stopwatch function

The stopwatch can measure up to 60 minutes in 1/100-second increments. After measuring
60 minutes, the stopwatch hands will automatically stop at the 0 minute 0 second position.

■ The names of the parts and functions of the stopwatch

Toggle to the "stopwatch display". "Toggling between displays" → P.12
1
5
2
6
3
4
Checking the position of the stopwatch hands after
resetting the stopwatch
Press Button C, and then
press Button B
1 Stopwatch seconds hand
moves in one-second increments
2 Button B
Split/Reset
3 Stopwatch 1/10-second hand
moves in 1/10-second increments
4 Stopwatch minute hand
moves in one-minute increments
• The hour and minute hands move while
overlapped.
5 Button C
Start/Stop
6 Stopwatch 1/100-second hand
moves in 1/100-second increments
The stopwatch hands have
The stopwatch is
stopped at the "0 seconds
reset.
and 0 minutes" position
The stopwatch hands have Adjusting the
stopped at a position other preliminary position of
than the "0 seconds and 0 the stopwatch hands
minutes" position → P.50
3
17
EN
3
19
EN