Peripherals - Gigabyte Z390 AORUS XTREME User Manual

2-6

Peripherals

& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX Sets the onboard graphics as the first display.
Sets the graphics card on the PCIEX16 slot as the first display. (Default)
PCIe 1 Slot
Sets the graphics card on the PCIEX8 slot as the first display.
PCIe 2 Slot
Sets the graphics card on the PCIEX4 slot as the first display.
PCIe 3 Slot
& OnBoard LAN Controller (Aquantia GbE LAN Chip, LAN1)
Enables or disables the Aquantia GbE LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
& LEDs in System Power On State
Allows you to enable or disable motherboard LED lighting when the system is on.
Disables the selected lighting mode when the system is on.
Off
Enables the selected lighting mode when the system is on. (Default)
On
& LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is configurable when LEDs in System Power On State is set to On.
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
Off
Enables the selected lighting mode when the system enters S3/S4/S5 state.
On
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
BIOS Setup
PTT Technology. (Default: Disabled)
- 60 -