Gigabyte Z390 AORUS XTREME User Manual page 30

8) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
Connect the thermistor cables to the headers for temperature detection.
9) LED_C1/LED_C2 (RGB LED Strip Extension Cable Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
rating of 2A (12V) and maximum length of 2m.
1
12V
For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 5, "Unique
Features," "APP Center\RGB Fusion."
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Hardware Installation
1
DEBUG
PORT
DEBUG
PORT
1
LED_C1
1
LED_C2
Connect one end of the RGB LED strip extension cable to the
header and the other end to your RGB LED strip. The black wire
(marked with a triangle on the plug) of the extension cable must be
connected to Pin 1 (12V) of this header. The 12V pin (marked with
an arrow) on the other end of the extension cable must be lined
RGB LED
up with the 12V of the LED strip. Be careful with the connection
Strip
orientation of the LED strip; incorrect connection may lead to the
damage of the LED strip.
- 30 -
Pin No. Definition
1 SENSOR IN
2 GND
Pin No. Definition
1 12V
2 G
3 R
4 B