Nortel Communication Server 1000 Manual page 171

Command
STRT n
CDSP
CMIN u
Table 75
IDA trunk maintenance messages available in LD 75 DCHI
Message
DSBL NOT RESPONDING
DSBL RESPONDING
ENBL IDLE
ENBL STARTING
ENBL ACTIVE
Table 76
IDA trunk maintenance messages available in LD 75 PRI2 card
Message
DSBL NOT RESPONDING
DSBL RESPONDING
ENBL
Table 77
IDA trunk maintenance messages available in LD 75 B-Channels
Message
UNEQ
DSBL
ENBL IDLE
ENBL BUSY
ENBL MBSY
DSBL RST, ENBL IDLE RST,
ENBL BUSY RST,
ENBL MBSY RST
Copyright © 2007, Nortel Networks
.
IDA trunk maintenance commands and messages 171
Description
Start DCHI port n. The message "OK STARTING" is displayed and
further commands may be entered. Message DTM301 is displayed
when the link is started successfully.
Clear the display
Clear the minor alarm for customer u.
Description
The D Channel Handler is disabled and does not respond to a
read/write test. All channels are disabled.
The D Channel Handler is disabled. All channels are disabled.
The D Channel Handler is enabled, but all channels are disabled.
The D Channel Handler is enabled, but all channels are being
enabled.
The D Channel Handler is enabled, and all channels are enabled.
Description
The Network card is disabled and does not respond to a read/write
test.
The Network card is disabled.
The Network card is enabled.
Description
Not configured.
Disabled.
Enabled and available for a call.
In use for a call.
Maintenance busy; that is, unusable.
Being reset; that is, unusable.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 02.01 Standard
Release 5.5 7 December 2007