Connecting To External Av Signal Source (Av2) - Polaroid FXM-3211C User Manual

System Connections

Connecting To External AV Signal Source (AV2)

Use the audio and video cable to connect the input jacks on the right side of the unit's rear panel to
the external AV signal source.
Use the S-Video cable to connect the S-Video input jacks on the right side of the unit's rear panel to
the external AV signal source.
Note: S-VIDEO cable will produce good image quality.
After connection, turn on the power of the unit and the external AV signal source, press the Input
button to enter the Input menu, then select AV2 (Composite) and press the Enter button to confirm
the selected mode.
If you are connected to both AV and S-Video signal sources at the same time, the S-Video is the
priority.
- 14 -