Connecting To Tv Signal - Polaroid FLU-1514SA User Manual

System Connections

Connecting to TV Signal

This unit can be connected to the TV signal input source via the TV jack on the rear panel.
After connection, turn on the power of the unit; press the INPUT button to shift to TV mode.
After connecting to the antenna, turn on the unit, and go on with program searching, you can
follow the below steps to select channels:
1. For 0~9 channel:
Press the number buttons to select the channel X, it will go to the selected channel immediately.
2. For 10~99 channel:
Press the number buttons to select channel XX, and it will go to the selected channel immediately.
* X is the channel number.
- 13 -