Power Save - Plustek OpticPro A320 User Manual

4. Click the Scan button. Part of the document image will be displayed in the
Alignment Window.
5. Click the Alignment Position buttons (Up, Down, Left, Right) until the top left
corner of the scanned document aligns with the top left corner of the Alignment
Window.
6. When the alignment completes, click on OK button to save settings and exit.
P S
OWER AVE
You may opt to keep the scanner lamp always on or define an idle time for the
scanning lamp to automatically turn itself off.
1. Right click the icon
Utility from the menu that pops up.
2. In the Power Save Mode section of the Scanner Utility window that opens,
click the button of your option:
a. To set the lamp being always illuminated: Click the button before "Keep
lamp always on".
b. To automatically turn the lamp off: Click the button before "Turn lamp off
after the scanner has been idle for ... minutes" and then click the up or
down arrows to set a default time for the lamp to automatically turn off after
a scan.
3. Click on OK button to save settings and exit.
on the Windows system tray and select Scanner
21