Plustek OpticBook 3600 Plus User Manual page 20

4. Click the Browse button in the File Options section for a destination folder
and enter the File name prefix to save the result.
5. Select Save all pages to one file or Save each page as a separate file
according to your scanning needs. (Note: Only OCR by Readiris selected, will
Save all pages to one file be enabled)
6. Click OCR Setting and/or Mode Setting button to shape more settings for
better-recognized result. (Note: Only OCR by Readiris selected, will OCR
Setting be enabled).
7. Adjust the scan frame on the preview image to set a desired scan area.
8. Click the Preview button to check whether the preview image is OK or not.
You can check the different effects of the scanned image in Color, Grayscale
and Text preview modes by checking the options under the preview image.
9. If you preview image(s) is satisfactory, please skip to step 11. If you preview
image(s) is not satisfactory, please go back to step 6.
10. If you want to recheck the image, click on the Preview button and go back to
step 2.
When you scan consecutive pages (e.g. book, magazine,
brochure), you don't have to configure scanning settings for
each page. However, all scanning settings restore to their
default settings when you close and launch the DigiBook
Information
program again.
11. Adjust your book to the same position as the preview image on the scanner
glass.
12. Press the Color Scan, Grayscale Scan or Text Scan button on the scanner
panel, and then the image shows up on the DigiBook window.
13. If the scanned image is satisfactory, turn your book to the next page and press
the Color Scan, Grayscale Scan or Text Scan button to continue scanning
the next page. If it's not satisfactory, click
position of the to-be-scanned page again and go back to step11.
to delete the image, adjust the
17