Table of Contents
Advertisement
Chapter I. Installing the Scanner
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the Box Contents section of
this guide.
Software Installation Requirements
Your scanner comes with the image-editing software (NewSoft Presto!
ImageFolio), OCR software (FineReader), document management software (Presto!
PageManager), the scanner's driver and the Action Express software. All of these
software applications use approximately 800 megabytes of hard disk space after they
are installed into your computer.
The USB scanner can only operate under the Microsoft Windows 2000, XP or
Vista operating system.
Hardware Requirements
This scanner connects to your computer through the Universal Serial Bus (USB),
which supports hot Plug and Play. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks the same
as the one pictured below. Note that on some computers, the USB port at the rear of
the computer may be occupied and additional ports may be found on the monitor or
keyboard. If you are having trouble in locating the USB port on your computer, please
refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which
usually appear as shown below.
If you don't find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.
USB Connector(s)
6
Hide quick links:
Advertisement
Table of Contents
