Plextor PX-712UF Installation And User Manual page 20

Section 2. Installing the PX-712UF External USB/FireWire Drive
• Disc/busy indicator: Illuminated yellow for disc initializing,
reading, and ejecting. Illuminated amber for writing. (Blink rate
indicates writing speed.) Illuminated green during standby and when
Buffer Underrun Proof Technology is operational.
• Disc tray: Slides out to allow you to insert a disc.
• Emergency eject hole: If the automatic eject button does not work,
turn the power switch to OFF, then insert the emergency eject tool,
paper clip, or other thin, rigid object in this hole to eject the disc tray
manually.
• Power indicator: Illuminated blue when the PX-712UF drive power
is ON.
• Eject button: Push once to eject the tray. Push again to load the tray
back into the PX-712UF. To prevent wear on the drive, always use
the eject button to load the tray.
This button also controls SpeedRead and silent operation for DVD-
Video discs with CSS protection. To enable SpeedRead, with the
disc tray empty, press and hold the eject button for 3 seconds, then
insert a DVD-Video disc. The disc is played back at an accelerated
speed.
12
PX-712UF Installation and Users Manual