Hardware Overview; Connections - D-Link DIR-842 User Manual

Section 1 - Product Overview
1 LAN Ports (1-4)
2 Internet Port
3 Power Port
4 Power Button
5 WPS Button
Reset Button
D-Link DIR-842 User Manual

Hardware Overview

1
Connect Ethernet devices such as computers, switches, storage (NAS) devices, and video game consoles.
Connect your broadband modem to this port using an Ethernet cable. Supports 10/100/1000 Gigabit Ethernet.
Connect the supplied power adapter to this port.
Press the power button to power the router on and off.
Press to start the WPS process. The WPS LED will blink during the process. The light will turn solid green when successfully
connecting to a device.
Located on the bottom of the router. Using a paper clip, press and hold for 10 seconds to reset the router back to the factory
default settings.

Connections

2 3 4
5
4