D-Link DIR-842 User Manual page 14

Section 2 - Installation
5. Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power
LED does not light up, press the Power button on the back of the router.
* If you are connecting wirelessly, you may now connect to the router using the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password.
6. After the router has powered up, verify that the Power and Internet LEDs are both lit. Proceed with router configuration.
D-Link DIR-842 User Manual
DIR-842
1 2 3 4 INTERNET 12V --1.5A
Modem
1 2 3 4 INTERNET 12V --1.5A POWER WPS
POWER WPS
Computer
Wireless
Computer*
10