System - D-Link DIR-842 User Manual

Section 3 - Configuration
This page allows you to save the DIR-842's current configuration, load a previously saved configuration, and reset the router to the factory default settings.
From the Admin page click System.
Save Settings Click Save to save the current router configuration settings to a file on
To Local Hard
your computer's hard drive.
Drive:
Load Settings Click Select File to locate and load previously saved router configuration
From Local
file. This will overwrite the router's current configuration.
Hard Drive:
Restore To
This option will restore all configuration settings back to the settings
Factory Default
that were in effect at the time the router was shipped from the factory.
Settings:
Any settings that have not been saved will be lost, including any rules
that you have created. If you want to first save the current router
configuration settings to your computer, use the Save button above.
Reboot The
Click Reboot to reboot the router.
Device:
D-Link DIR-842 User Manual

System

67