Switches Between Output Modes - Boss DM-101 Reference Manual

Switches Between Output Modes

You can change how the output works by switching between output modes.
You can turn the output of the direct sound off when you want to output only the effect's sound, such as when you're connecting
this unit to the send/return of a mixer.
1. Press and hold down the [TAP] switch, and turn on the power.
2. Turn the Mode knob to the "MODERN" setting.
3. Use the [MEMORY] button to select the output mode.
MEMORY Output mode
indicators
MANUAL NORMAL
1 DIRECT/EFFECT When a plug is inserted into the OUTPUT A/B jacks:
2 DIRECT MUTE
4. Press the [TAP] switch to exit the function settings.
Function
When a plug is inserted into the OUTPUT A/B jacks:
The effect sound (L ch) + direct sound is output from the OUTPUT A jack, and the
effect sound (R ch) + direct sound is output from the OUTPUT B jack.
When a plug is inserted into the OUTPUT A jack only:
The effect sound and direct sound are output.
The effect sound (L ch + R ch) is output from the OUTPUT A jack, and the direct
sound is output from the OUTPUT B jack.
When a plug is inserted into the OUTPUT A jack only:
The effect sound (L ch + R ch) is output from the OUTPUT A jack.
Turns the direct sound output off.
When a plug is inserted into the OUTPUT A/B jacks:
The effect sound (L ch) is output from the OUTPUT A jack, and the effect sound (R
ch) is output from the OUTPUT B jack.
When a plug is inserted into the OUTPUT A jack only:
The effect sound (L ch + R ch) is output from the OUTPUT A jack.
Various Settings
13