Mounting To A Bend Or Snub Pulley - Siemens SITRANS WS300 Operating Instructions Manual

Installing/mounting

3.5 Mounting to a bend or snub pulley

Note
• Distance (d) is the take up travel on the tail pulley.
• When adjusting the belt take up, ensure there is play on the arrestor rod. If the arrestor rod
is pushed against the end of its travel slot, premature wear may result on the bearing.
3.5 Mounting to a bend or snub pulley
①
Belt direction
②
Belt
⑤
Flexible conduit
12
③
Tension spring (supplied)
④
Stringer
Operating Instructions, 08/2020, A5E45050935-AB
SITRANS WS300