CONNECTING THE HEADSET
Using the Quick Disconnect
Module
™
Use the Quick Disconnect (QD) Module to place a call
on hold and move away from the phone without removing
the headset.
To put your call on hold, grasp the QD Module as shown and
J
pull straight apart.
To resume your conversation, reconnect the two halves.
Polaris
Headset Variations
™
Polaris Headset Variations, designed for use with phones with a
K
clearly marked headset jack, do not require an Amplifier. Insert
the Polaris connector directly into the headset jack. Consult your
telephone's instruction manual for more information.
For Non Polaris Versions
You are now ready to install the Amplifier.
9