Table of Contents
Advertisement
OVER-THE-HEAD CONFIGURATION
If already in place, remove the Pivot Ball Ring
Earloop
.
Press the Ear Cushion and Rubber Ring
Assembly
. Align the notch in the ring with the Voice
Boom
.
Snap the ball on the end of the Headband
on the rear of the Headset Assembly
Place the Headband
Ear Cushion
positioned above the opposite ear.
If the headband is too tight or too loose, grasp the metal part
of headband and gently bend in the middle. The headband
length may be adjusted for fit and comfort.
over the top of your head, with the
resting gently against your ear and the T-Bar
and
onto the Headset
into the socket
.
6
B
A
A
E
F
Advertisement
Table of Contents
