BenQ Mobiuz EX3415R User Manual page 19

2. Connect the power cable to the monitor.
Pass the cable through the cable management hole on the
stand arm first.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the other
end to a power outlet just yet.
3. Connect the video cable.
The video cables included in your package and the socket illustrations in this document may vary depending on the
product supplied for your region.
1. Pass the cables through the cable management hole on the stand arm.
2. Establish a video cable connection.
• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable
to the computer video socket.
3. Connect the other end of the video cable to an appropriate port of a digital output source (e.g., a
computer).
4. Connect the audio cable.
You may connect headphones to the headphone jack found
on the back side of the monitor.
Pass the cable through the cable management hole on the
stand arm.
or or
19