Making The Connections - Planar GX3MP Reference Manual

Making the Connections

Use only the DVI cable and power cord supplied with your Planar GX3MP display.
To connect the display
1 Plug one end of the DVI cable
into the DVI connector port.
Tighten the thumbscrews to
secure the connection.
2 Plug the power cord into
the power input port.
3 Plug the other end of the
DVI cable into DVI port 1
(the bottom port) on the
installed graphics card.
4 Plug the other end of
the power cord into a
grounded outlet.
5 Power on your display
fi rst, then the computer.
8
Power cord DVI cable