Table of Contents
Advertisement
ADJUSTING THE FRONT SHOCK ABSORBERS (for models equipped with two
compression damping adjusters)/ADJUSTING THE REAR SHOCK ABSORBER
(for models equipped with two compression damping adjusters)
1
4. Adjust:
• compression damping force (slow compres-
sion damping)
M
MMM
M MMM
M
M MMM
M
a. Turn the adjusting screw 1 in direction a
or b.
Direction a
Direction b
From the fully turned-in position
Standard: 10 clicks out
Minimum: 20 clicks out
Maximum: 1 click out
NOTE:
_
Make sure that the position indicator marks c
are aligned when the shock absorber is set to
the standard setting.
CAUTION:
Do not force the adjuster past the minimum
or maximum extent of adjustment. The
adjuster may be damaged.
L
LLL
L LLL
L
L LLL
L
EBS00111
ADJUSTING THE REAR SHOCK
ABSORBER (for models equipped with two
compression damping adjusters)
1. Remove:
• seat
Refer to "SEAT, FENDERS AND FUEL
TANK" in chapter 3.
(Manual No.: 5TG-28197-10)
2. Loosen the clamp screw 1, and then dis-
connect the air intake duct.
– 15 –
CHK
ADJ
M MMM
M
M MMM
M
M MMM
M
Compression damping
force is increased.
Compression damping
force is decreased.
L LLL
L
L LLL
L
L LLL
L
MMM
LLL
Advertisement
Table of Contents
