How to Configure Wireless Security for a RADIUS Server
If you have a Radius Server, select the WPA/WPA2 options without PSK.
To enable WPA and WPA2 without PSK, follow these steps:
1.) Find the WPA-PSK Security Settings tab. If WPA-PSK is Enabled, select
Disabled from the WPA-PSK pulldown and click Save. (Note that
WPA-PSK is Disabled by default).
2.) If WPA2-PSK is Enabled, select Disabled from the WPA2-PSK pulldown
and click Save. . (Note that WPA2-PSK is Enabled by default).
3.) Select Enabled for WPA2. Do not click Save yet.
4.) Enter the RADIUS Server Address and click Save.
5.) Enter the RADIUS Port and click Save.
6.) Enter the RADIUS Key and click Save.
7.) If you want to enable WPA, select Enabled for WPA, and click Save.
8.) If you want to enable WPA2, make sure Enabled is selected for WPA2,
and click Save.
9.) If you want to disable WPA2, select Disabled for WPA2, and click Save.
10.) Under Encryption, if you have enabled WPA, or WPA and WPA2,
select AES+TKIP. If you have enabled WPA2 only, select AES only.
11.) Click Save.