192.168.0.1 in the address bar of your browser, go to that address, enter the
Username admin and Password motorola, then click the Login button.
This will bring you to the Basic Status and Settings page. Click the Advanced
button in the upper right. This will bring you to the Status
Hover over the Wireless menu item, and select the WPS_RADIUS_WEP
submenu:
To enable WPA-PSK, follow these steps:
1.) Find the WPA-PSK Security Settings tab. Select Enabled from the
WPA-PSK pulldown.
2.) Click Save.
3.) Under Encryption, select AES+TKIP.
4.) Click Save.
If you need to support WEP, follow these steps.
1.) Disable all WPA and WPA-PSK entries.
2.) Make sure to click Save for each entry you change.
3.) Under 802.11n Mode Enable/Disable, select Disable from the
pulldown.
4.) Click Save.
5.) Find the tab WEP Security Settings.
6.) In the field PassPhrase, enter a sequence of letters. This can be words,
names, or an arbitrary sequence.
7.) Click the button Generate WEP Keys.
8.) In the WEP Encryption pulldown, select either WEP‐64 bit or WEP‐128 bit.
(WEP‐128 offers more security).
9.) Select Enabled on the Show Keys pulldown.
Software page.