Table of Contents
Advertisement
139987-C GI 645 DV and DV MV 6/21
Figure 7.27 Engage matching notches in the underside of Center
Cross Log #4 with the corresponding cradle on Log #3 and the pin
on the Burner as indicated in fig. 7.26 and 7.26a.
1
2
Figure 7.28 Place #1 Left Beach Fire Rock and #2 Left Burner
Rock under Front Left Log #2. Place #3 Center Burner Rock with
the angle facing in towards center of log #2. Make sure not to
block burner ports.
Figure 7.29 Place #4 Right Beach Fire Rock and #5 under Right
Front Log #3. Make sure not to block burner ports.
24
Log 5 PIN
Log 5 Cradle
4
3
5
4
Log 6 PIN
Log 6 Cradle
Figure 7.30 Engage matching notches in the underside of the
Right Top Cross Log #5 with the corresponding notches on Log #1,
#3, and the Burner Skirt as indicated in fig. 7.27
6
Figure 7.31. Engage matching notches in the underside of the Left
Top Cross Log #6 with the corresponding pin on Log #1 and cradle
on Log #2, as indicated in fig. 7.30
PILOT
PORTS
BURNER
CARRY-OVER PORTS
Figure 7.32 Keep Burner and Pilot carry-over ports clear.
5
PILOT
PORTS
Advertisement
Table of Contents
