Hcec Setup - LG 75/86UU3 U Series Installation Manual

HCEC Setup

CEC Mode
- You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC].
- If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable
and disable SIMPLINK through SIMPLINK MENU.
- If [HCEC] is selected, you can use TVLink-HCEC Protocol. For more detailed information, please
refer to TVLink-HCEC Protocol document)
- If [TVLink-CEC] is selected, TV will not directly work for key input except for power key. And
volume related keys will work just in case of Follower volume control mode. (for more detailed
information regarding the scenario of volume control, please refer to "TVLink-CEC protocol"
document)
IR Decoding
- When 'IR Decoding' is set to 'Enable' , the TV decodes and changes it into a CEC Message and
sends it to Command via the HDMI CEC Line. The default value is Disable.
Device ID
- Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose between 'All'
and 'E' .
- The default value is 'All' .
INSTALLATION MENU
15